PubMed چکیده/رکورد

Cytotoxicity Investigation of Ti3C2Tx MXene toward Human Umbilical Vein Endothelial Cells.

استودیوی صوتی مقاله

پخش حرفه‌ای فارسی و انگلیسی

در حال بررسی نسخه‌های صوتی ذخیره‌شده…

صوت تولیدشده با هوش مصنوعی است. برای کاربرد علمی یا درمانی، متن و منبع اصلی را بررسی کنید.
خواندن هوشمند فارسی و انگلیسی در حال آماده‌سازی صداهای مرورگر…
تنظیم صدای طبیعی و سرعت

صداهایی که در نامشان «Natural»، «Neural» یا «Online» دیده می‌شود معمولاً طبیعی‌ترند. انتخاب صدا به صداهای نصب‌شده در ویندوز و مرورگر شما بستگی دارد.

چکیده اصلی

MXenes are emerging two-dimensional nanomaterials with promising potential for biomedical applications, including osteogenic differentiation, antibacterial properties, anticancer therapy, and drug delivery systems. However, biocompatibility studies with blood vessels or endothelial cells need more thorough research. In this study, delaminated and multilayered Ti3C2Tix MXenes were synthesized from the Ti3AlC2 MAX phase and characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD) and applying violet, blue, and red side scatter width (SSC-Width) and high (SSC-H) functions of a flow cytometer. MXene-cell association was examined using the red side scatter area (SSC-A) function of the flow cytometer. HUVEC responses following 1- and 3-day exposure to MXenes were evaluated by nuclei count and LDH release. Apoptosis was also evaluated with a flow cytometer and Annexin V/propidium iodide staining. Both types of MXene were associated with HUVECs and showed a concentration-dependent response; however, delaminated 2D-like MXene flakes were significantly more cytotoxic than multilayered 3D-like MXenes: at low concentrations (1-3 μg/mL), their cell number started decreasing, LDH release increased, and late apoptosis and necrosis were induced, while multilayered MXenes showed similar effects at a much higher concentration, at 25 μg/mL. Comparing the influence of two different structures of MXenes suggests that the delaminated MXenes may exhibit enhanced MXene-cell interactions than multilayered MXenes, which is leading to membrane perturbation and subsequent effects on cell viability and apoptosis. Overall, these findings demonstrate that advanced, multiparametric, and high-performance flow cytometry can be used not only for the cell analysis but also for the identification of nanoparticle size, and MXene-cell association. Data also shows that biocompatibility of delaminated and multilayered Ti3C2Tix MXene in HUVECs is a strongly preparation-dependent process, which highlights the importance of evaluation of standardized biocompatibility strategies for the development of safe MXene-based biomedical applications.

نتیجه فارسی

مکسن‌های دال‌شده Ti3C2Tx در برابر سلول‌های اندوتلیال رگ ابربشری (HUVEC) بسیار سمیت‌زا هستند. مکسن‌های دال‌شده در غلظت‌های پایین باعث مرگ سلولی و آپوپتوز می‌شوند، در حالی که مکسن‌های چندلایه اثرات مشابه را در غلظت‌های بسیار بالاتری نشان می‌دهند. بایوکامپاتی‌بیلیت مکسن‌ها به فرآیند آماده‌سازی وابسته است.

  • مکسن‌های دال‌شده (delaminated) بسیار سمیت‌زا از مکسن‌های چندلایه (multilayered) هستند.
  • مکسن‌های دال‌شده در غلظت ۱-۳ میکروگرم بر میلی‌لیتر باعث مرگ سلولی می‌شوند.
  • مکسن‌های چندلایه اثرات مشابه را در غلظت ۲۵ میکروگرم بر میلی‌لیتر نشان می‌دهند.
  • بایوکامپاتی‌بیلیت به فرآیند آماده‌سازی وابسته است.

ترجمه فارسی چکیده

مکسن‌ها (MXenes) مواد نانومتری دو بعدی در حال ظهور با پتانسیل وعدی برای کاربردهای زیست‌پزشکی هستند. در این مطالعه، مکسن‌های تیتانیوم سه کاربنی (Ti3C2Tix) از فاز MAX تیتانیوم سه آلومینیوم کاربید (Ti3AlC2) سنتز و با میکروسکوپ الکترونی روبشی (SEM) و پراش اشعه ایکس (XRD) و همچنین توابع پراکندگی عرضی (SSC-Width) و پراکندگی عرضی بالا (SSC-H) و همچنین پراکندگی عرضی مساحتی (SSC-A) یک سیتومتر جریان مورد بررسی قرار گرفتند. پاسخ سلول‌های اندوتلیال رگ ابربشری (HUVEC) در معرض مکسن‌ها در روزهای ۱ و ۳ بررسی شد. نتایج نشان داد که هر دو نوع مکسن با سلول‌ها مرتبط هستند و پاسخ وابسته به غلظت دارند، اما مکسن‌های دال‌شده (delaminated) بسیار سمیت‌زا از مکسن‌های چندلایه (multilayered) هستند. مکسن‌های دال‌شده در غلظت‌های پایین (۱-۳ میکروگرم بر میلی‌لیتر) باعث کاهش تعداد سلول، افزایش آزادسازی LDH و القای آپوپتوز و نکروز شدند، در حالی که مکسن‌های چندلایه اثرات مشابه را در غلظت بسیار بالاتری (۲۵ میکروگرم بر میلی‌لیتر) نشان دادند. این یافته‌ها نشان می‌دهد که بایوکامپاتی‌بیلیت مکسن‌ها به فرآیند آماده‌سازی وابسته است.

روش پژوهش

مکسن‌ها از فاز MAX سنتز شدند و با SEM و XRD و سیتومتر جریان بررسی شدند. پاسخ HUVEC در روزهای ۱ و ۳ با شمارش هسته و آزادسازی LDH ارزیابی شد.

محدودیت‌ها

محدودیت‌ها در متن گزارش نشده‌اند.

استخراج ساختاریافته از متن منبع

نمای PICO و پیامدها

جمعیت
سلول‌های اندوتلیال رگ ابربشری (HUVEC)
مداخله/مواجهه
مکسن‌های دال‌شده و چندلایه Ti3C2Tx
مقایسه
مقایسه دو ساختار مکسن
حجم نمونه
گزارش نشده

متن کامل اصلی

متن در JumpToDate ذخیره نشده است.

برای بررسی دسترسی کتابخانه‌ای یا خرید، رکورد اصلی را باز کنید.

رفتن به منبع اصلی

کلیدواژه‌ها

MXeneSEMapoptosiscytotoxicityendothelial cellsflow cytometry
در همین زیرشاخه

مقاله‌های مرتبط

PubMed2026

Slippery when wet: The effect of a novel zwitterionic coating on silicone ureteral stents.

Silicone ureteral stents provide anti-encrustation properties and patient comfort but are more difficult to insert and remove due to increased surface friction. Applying zwitterionic coatings to silicone stents may reduce friction and facilitate stent placement and removal. This study compared the frictional forces of zwitterionic-coated silicone stents with commercial stents using benchtop models. The static and kinetic frictional for…

PubMed2026

Thermo-aided citrate cross-linking of a pullulan sponge incorporating tissue factor and collagen for potent bleeding wound care.

Most existing wound dressings provide only passive hemostasis and protection, and lack robust bio-interactions, active coagulation capabilities, or pro-healing functions, often leading to prolonged bleeding, delayed repair or recurrent bleeding. This paper describes a multifunctional spongy dressing fabricated via thermo-aided citrate cross-linking of pullulan, incorporating tissue factor (TF, a potent physiological coagulation initiat…

PubMed2026

Perspectives on the future of biofabrication: insights from the winter school for biofabrication.

Biofabrication is a multidisciplinary field that integrates diverse technologies to create three-dimensional structures composed of living cells, biomaterials, and other biological components. One of its main goals is the realization of functional tissue constructs with hierarchical architectures, as observed in native biological tissues, for applications in tissue engineering and regenerative medicine, as well as forin vitromodelling.…

PubMed2026

Sustainable hemocompatibility prediction of electrospun nanomaterials using SEM-driven CNN ensemble learning aligned with ISO 10993.

BACKGROUND: Electrospun nanocomposite biomaterials are promising candidates for blood-contacting medical devices owing to their high surface area, tunable nanoscale morphology, and biomimetic replication of the native extracellular matrix. However, conventional hemocompatibility assessments rely heavily on biological assays. These methods require blood samples, specialized reagents, and consumables, thereby inherently increasing costs,…